DENNISON MFG CO IDENTIFICATION SYSTEMS DIV -- CARTER'S RUBBER CEMENT THINNER  -- 6850-00N001133
<pre>=====================  Product Identification  =====================

Product ID:CARTER'S RUBBER CEMENT THINNER
MSDS Date:07/19/1988
FSC:6850
NIIN:00N001133
=== Responsible Party ===
Company Name:DENNISON MFG CO IDENTIFICATION SYSTEMS DIV
Address:300 HOWARD STREET
City:FRAMINGHAM
State:MA
ZIP:01701-8832
Country:US
Info Phone Num:508-879-0511
Emergency Phone Num:508-879-0511
CAGE:16956
=== Contractor Identification ===
Company Name:DENNISON MFG CO IDENTIFICATION SYSTEMS DIV
Address:300 HOWARD STREET
Box:City:FRAMINGHAM
State:MA
ZIP:01701-8832
Country:US
Phone:508-879-0511
CAGE:16956

=============  Composition/Information on Ingredients  =============

Ingred Name:NAPHTHENE
Fraction by Wt: 10.0%

Ingred Name:PARAFFINIC SOLVENT
Fraction by Wt: 90.0%

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE IRRIT, DRYING OF SKIN, EXCESS INHAL CAUSES
    HEADACHE, DIZZINESS AND NAUSEA.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT:FLUSH W/WATER; SKIN CONTACT: WASH W/MILD SOAP &
    WATER & APPLY SKIN CREAM; INHALATION: REMOVE TO FRESH AIR & CALL
    PHYSICIAN; APPLY ARTIFICIAL RESPIRATION IF NECESSARY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:<10F,<-12C
Lower Limits:1.1%
Upper Limits:7%
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER FOG OR
    SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . COOL EXPOSED CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:IN CASE OF LARGE FIRES, ALSO COOL
    SURROUNDING EQUIPMENT & STRUCTURES W/WATER. DO NOT STORE OR MIX
    W/STRONG OXIDANTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
    CONTAINER. AVOID EXPOSURE TO SPARKS, FIRE OR HOT METAL SURFACES.
    (MFR RECM)

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, & OPEN
    FLAME. USE W/ ADEQUATE VENTILATION. AVOID PROLONG OR REPEAT CONTACT
    W/ SKIN. REFER TO CONTAINER LABEL. (MFR RECM).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS FOR CONC >
    TLV (NIOSH/MSHA APPRD)
Ventilation:LOCAL(OR MECH EXHAUST: CLASS D EXPLO PROOF MOTOR &
    SWITCHES)
Protective Gloves:REQUIRED
Eye Protection:REQUIRED
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health
COMBINED TLV FOR NAPHTHENE & PARAFFINIC SOLVENT IS 160 PPM (MFR RECM).
    VAPOR MEAS AT 69F.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:B.P. Text:>151F,>66C
Vapor Pres:250
Vapor Density:3.3
Spec Gravity:0.72 (H*2O=1)
Evaporation Rate &amp; Reference:5.8 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER-WHITE LIQUID W/HYDROCARBON ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIANT SUCH AS CHLORINE.
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS. MUST BE IAW
    LOCAL,STATE, & FEDERAL CODES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.